Frequently Asked Questions
No tools required, simply screw Breeze Brite into any standard light socket and use the included remote to turn on the light or fan. **Note: Make sure your wall switch is in the ON position if you are using a socket that is controlled by a switch.
2100 Lumens
Using Breeze Brite's remote - Press to turn the Fan On and Off. L - The Fan will be in Lowest Speed, M - Medium Speed, H - Highest Speed
6000k
1 lb. 2.7 oz
10.5”
Using Breeze Brite's remote - Press to turn the Light On and Off. L - The light will be in Low Luminosity, M - Medium Luminosity, H - High Luminosity
No. Breeze Brite is equipped with LED lights that will last up to 50,000 hours.
Breeze Brite has an extended connector to work with recessed light fixtures. If the socket is too deep, then you will need to use an ETL or UL approved socket extender. These are available online and at most hardware stores. They are not included with the Breeze Brite.
Yes, the Breeze Brite can be controlled with your light switch. Just toggle the light switch until you reach the desired setting.
If your Breeze Brite is not turning on, please check to see that the power is turned on to the socket you are using. (ie. Check to see that your wall switch is switched on)
- Check that the battery tab has been pulled out before starting use.
- Change the angle you are aiming at the Breeze Brite to ensure you are hitting the receiver.
Review the directions on the backside of the remote. Push in the side tab and pull out the battery tray. Replace battery.
CR2025-2032 (3.V)
